If you already decided to buy an air conditioner, then you need to confirm if your older model needs to be replaced or not. If you have to, and you are thinking about contemplating installing it yourself, then you should be very cautious about the AC installation mistakes that are a bit common because of which you need to pay a huge penalty later.
You might have to contact the HVAC repair services too soon because you made a mistake. The reason is that there is a flawed method being adopted in the process. In this article, you will discover installation mistakes you need to avoid so that you will know if anything is wrong right away.
You Chose the Wrong Size of AC
One of the most common issues people make is that when they install an air conditioner inside their home, is that they choose the wrong size. If you buy the wrong size, there are many consequences you need to face, which lead to the dysfunction and energy efficiency issues of your AC.
When you install an AC unit that is too big, it will cause short cycling. That is why installing an AC that is too small leads to overwork. When it comes to this, the AC is going to experience unnecessary wear and tear, which results in premature failures.
You Position the Thermostat Wrongly
Maybe you do not realize that thermostats should be strategically positioned. If they are not in the right positions, there are temperature inconsistencies that could arise, and air conditioners do not perform their functions as necessary.
First of all, you need to be sure that your thermostat is kept out of the sunlight. Temperature inaccuracies can be triggered by sunlight, which causes your AC to have incorrect temperatures inside your home.
You might want your thermostat to be away from doors and windows. Wind drafts can trick your AC to think that it is colder or warmer compared to what it is. This is going to cause inaccuracies again.
Substandard Drainage System
During the operation of an air conditioner, it will create enough moisture. If this moisture is not properly filtered, then it can inflict damage on everything within proximity. This will include your house, which is damaging to the drywall, mold growth, backed-up pipes, as well as musty smells.
However, if you implement a bad drainage system, it is among the most common air conditioner mistakes that people commit. Many households suffer because of water damage.
Installing Without Doing a Leak Check
Among the most common mistakes is that people neglect a refrigerant leak after installing the AC. The truth is that the level of refrigerant should be checked immediately after the installation. A check on the leak in due time can be a cause of serious issues.
In every 10% of lost refrigerant, it causes a 20% increase in your electricity bill. Without doing a leak check, the entire air conditioner can overheat and break down leading to repairs and extra expenses. In addition, a refrigerant leak brings decreases the inefficiency of an HVAC system, even when it is operating at maximum. It darkens the compressor insulation and burning smell appearance. Therefore, the installation of your AC should first have a proper leak check.
Wrong Condenser Placement
You should place the condenser in the shaded area. If the condenser gets less sun, there is a lesser strain on it. This is going to ensure that the condenser functions properly.
You can contact AC repair services Vienna VA anytime in case you are facing installation problems.
