The cool thing with having a heat pump is that you can use it to heat the house during the cold months then when it gets hot, you can use it as an air conditioner. Do you want to get the most from your unit? Here are some of the things you can do as given by heat pump repair professionals:
Maximize the use of the heat pump
When you decide to use the heat pump as a heating unit, you should use it to the maximum. One of the things you can do is to set the unit at least 10 degrees cooler than you normally do. In addition to this consuming just minimal amounts of energy, it also means that you are using the older unit as just a backup.
In addition to maximizing the usage of the heat pump, you also should maximize the heating zone. When you are looking to heat multiple zones, you should open the doors between the heat pump and any other rooms you are looking to heat.
Are you looking to heat only one room where you have installed the heat pump? Close all the doors to the adjacent rooms.
Does your central system have zones? Turn the zones turn or off where the heat pump is located. Heat pump experts report that by doing this you aid in getting out the most from the heat pump.
If your central system isn’t zoned or the zone of the heat pump is very large, consider closing the dampers and registers in the room where the heat pump is located.
Set the right temperature
The temperature you set the thermostat has a great impact on how the unit works. When you are setting the heat pump, set the thermostat for comfort. This calls for you to set the unit to a temperature that makes your home feel more comfortable.
In most cases, the temperature might be higher than you are used to.
You should use the “Auto” mode with caution. Since the auto mode automatically switches between heating and cooling based on the outdoor temperature, the unit could start generating heat on the cooler nights. The unit can also start cooling on a winter afternoon.
When you are using the mode in commercial spaces, the auto mode can lead to heating and cooling battles between the heating units.
Instead of using the auto mode, the best way of going about it is setting the heat pump mode to “heat” in the winter and “cool” in the summer.
Instead of having to keep on messing with the heating unit settings, you should set the heat pump settings and forget it. Set the unit at a comfortable level then leave it alone. If your heat pump is properly maintained, it will maintain a steady temperature.
Set the fans properly
You might have heard that you can save a lot of energy by using the fan properly. While this is true, most people don’t know how to properly set the fan. The best way of going about it is setting the fan on “Auto fan.”
If the fan doesn’t spread the heat far enough at this setting, try setting the unit manually. This way you will find the lowest level that will meet your needs. Are you using the heat pump to heat more than one room? Set the fan mode on “high” or “medium-high.”
When setting the fan, adjust the direction of air flow. This calls for you to direct the warm air towards the floor and away from the people living in the house. When it comes to cool air, direct it up high or directly at the house occupants.
Maintain the heat pump
You need to keep the heat pump in good condition. The cool thing is that according to heat pump repair service Arlington VA providers, there are plenty of tricks you can use to keep your heat pump in top shape. Some of the things you can do include:
- Regularly cleaning the dust filters
- Preventing ice from building up in the outdoor unit
- Cleaning or replacing the allergen cartridges
- Regularly cleaning the outdoor unit
- Keeping the outdoor unit clear of any obstructing materials
