Blog

HVAC Repair Tips

air-conditioner-heat-pump-repair-cost

People have an unending need to enter a well-air-conditioned home during the summer. If you have an AC unit that works efficiently, you should feel heavenly. Therefore, you need to make sure that you have a well-maintained unit every season. From time to time, you will need AC repair services so you can have any issues addressed. You will not have a hard time finding out if your AC unit is efficient after you have read this article.

You can use the information you find here to tell if you have an efficient AC. There are so many brands out there that claim to be long-lasting, but you also need to do your part.

Find out more.

Inspect the Filter

The primary thing you must determine is to inspect the air filters. When the air filters are clogged, the debris will interrupt airflow, which can affect the efficiency of the unit. The AC has to work harder in order to meet the cooling needs of the houses, and it uses more energy. You must change the filters every 3 months, but you have to change or clean them every month if you are in a dusty area or you have a shedding pet. In case you cannot remember the last time you cleaned or changed your filters, the AC might not be as efficient as before. This keeps your utility bills lower for the entire summer.

Temperature Difference

The next thing you need to do is to put the thermometer on a supply vent, which is the one pulling air from the house going into the air conditioner. You must allow it to sit there for 5 minutes and check what the reading is. The difference between the air that comes out of the supply vent and air that goes into the return vent must be about 15 and 20 degrees. This difference is known as the return drop, and it should not be larger because it would mean that something is wrong. If the difference is smaller, your air conditioner is not pulling heat from the air efficiently.

Run Time

The AC should stay on long enough to do its job. If the system is turning on right away, reaches the setting you want, and then turns off immediately, your AC should be cycling properly. That means you have an energy-efficient unit.

In case your AC continues to cool your area after reaching the desired temperature, then your system is not energy efficient, and you most likely have a thermostat issue. See if the thermostat’s battery needs to be changed. If there are no battery issues, you might have to call a professional.

Drain Line Inspection

If you have a clogged drain line, it can affect the AC’s efficiency. If the drain pan collects too much water, the AC will always shut down before it reaches the desired temperature. The majority of modern units have a safety mechanism, which is going to shut off the system when it detects excess water to prevent any damage. Therefore, you should check the drip pan many times.

Bills are Consistent

Another good sign that you have an efficient AC is that there is very little change in the energy cost of bills over time. If you can see that your bill is staying at a reasonable average, you most likely have an efficient AC.

If there are spikes or a gradual increase in your bills, it most likely means your AC uses more energy than it should.

You can contact air conditioner repair services Vienna VA if you have an inefficient AC.